preliminary data this is preliminary information on a new product now in development or undergoing evaluation. details are subject to change without notice. october 2007 rev 1 1/9 9 STH13009 high voltage fast-switching npn power transistor features high voltage capability low spread of dynamic parameters very high switching speed applications switching mode power supplies description the device is manufactured using high voltage multi epitaxial planar technology for high switching speeds anh high voltage capability. it uses a hollow emitter structure to enhance switching speeds. . figure 1. internal schematic diagram to-220 1 2 3 www.st.com table 1. device summary order code marking package packaging STH13009 h13009 to-220 tube
absolute maximum ratings STH13009 2/9 1 absolute maximum ratings table 3. thermal data table 2. absolute maximum ratings symbol parameter value unit v cev collector-emitter voltage (v be = -1.5v) 700 v v ceo collector-emitter voltage (i b = 0) 400 v v ebo emitter-base voltage (i c = 0) 12 v i c collector current 12 a i cm collector peak current (t p < ms) 24 a i b base current 6 a i bm base peak current (t p < ms) 12 a p tot total dissipation at t case = 25c 100 w t stg storage temperature -65 to 150 c t j max. operating junction temperature 150 c symbol parameters value unit r thj-case thermal resistance junction-case __ max 1.25 c/w
STH13009 electrical characteristics 3/9 2 electrical characteristics (t case = 25c; unless otherwise specified) table 4. electrical characteristics symbol parameter test conditions min. typ. max. unit i cev collector cut-off current (v be = -1.5v) v ce = 700 v v ce = 700 v t c = 100c 10 500 a a i ebo emitter cut-off current (i c = 0) v eb = 10 v 10 a v ceo(sus) (1) 1. pulsed duration = 300 ms, duty cycle 1.5%. collector-emitter sustaining voltage (i b = 0) i c = 10 ma 400 v v ce(sat) (1) collector-emitter saturation voltage i c = 4 a __ i b = 0.8 a i c = 5 a __ i b = 1 a i c = 8 a __ i b = 1.6 a i c = 12 a _ i b = 2.4 a 0.2 0.25 0.35 0.6 0.5 0.6 1 2 v v v v v be(sat) (1) base-emitter saturation voltage i c = 5 a __ i b = 1 a i c = 8 a __ i b = 1.6 a 1.2 1.6 v v h fe (1) dc current gain i c = 5 a _ v ce =5 v i c = 8 a _ v ce =5 v 18 11 30 23 t s t f inductive load storage time fall time v cc = 250 v i c = 5a i b1 = 1 a i b2 = -2 a l = 200 h 1.7 100 2.5 140 s ns
electrical characteristics STH13009 4/9 2.1 electrical characteristic (curves) figure 2. safe operating area figure 3. derating curve figure 4. dc current gain figure 5. dc current gain figure 6. collector-emitter saturation voltage figure 7. base-emitter saturation voltage
STH13009 electrical characteristics 5/9 2.2 test circuit figure 10. inductive load switching test circuit figure 8. inductive load switching time figure 9. reverse biased safe operating area 1) fast electronic switch 2) non-inductive resistor
package mechanical data STH13009 6/9 3 package mechanical data in order to meet environmental requirements, st offers these devices in ecopack? packages. these packages have a lead-free second level interconnect . the category of second level interconnect is marked on the package and on the inner box label, in compliance with jedec standard jesd97. the maximum ratings related to soldering conditions are also marked on the inner box label. ecopack is an st trademark. ecopack specifications are available at: www.st.com
STH13009 package mechanical data 7/9 dim. mm. min. typ max. a 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.49 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e 2.40 2.70 e1 4.95 5.15 f 1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ?p 3.75 3.85 q 2.65 2.95 to-220 mechanical data
revision history STH13009 8/9 4 revision history table 5. document revision history date revision changes 15-oct-2007 1 initial release
STH13009 9/9 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at an y time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, an y liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2007 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
